High Speed Separators

Fuel & Lube Oil Cleaning

Add years of life to your industrial fuel and lube oils by using Alfa Laval high-speed separators – which remove free water and more than 99% of solid particles.

Model	Emmie 2	OCM Light 503	OCM 103	OCM 104	OCM 304	OCM 305	OCM 206
Max capacity, gallons per minute	0.88	4	4.4	7	9	17	34
Max separation temperature, F	160	203	212
Sludge and water space, gallons	0.16	0.16	0.15	0.33	0.43	0.47	0.89
Approx Weight, lbs	220	1050	761	1069	1202	1202	2426
Dimensions, mobile, inches, LXWXH	25x27x45	57x34x50	51x50x38	62x30x58			82x44x66

Emmie 2

This mobile centrifugal separator system cleans any service oil. It removes virtually all free water and more than 99% of solid particles 2-5 µm in size. This disc stack separator provides rapid, simultaneous and continuous three phase separation of water and particles.

It is ideal for small installations as you can move and connect it quickly – it is installed in a bypass flow so no machinery alterations are required. It requires no supervision once started. Emmie 2 is a complete compact unit, including the separator, feed pump and easy to operate control system.

OCM

This unit can clean while oil is being used or when the primary equipment is at a standstill. It’s a modularized system with all components integrated and pre-configured on a skid.

This streamlines installation – and means it works without operator supervision. As a result, it’s never been easier to avoid equipment breakdown and unnecessary downtime. It has low operating costs and there is no need to dispose of filter cartridges, minimalizing the environmental impact of sludge disposal.

AlfaPure

With the Alfa Laval S and P Flex range, your separator system is tailored to your performance. P separators are purifiers for well-defined oils, with good water removal characteristic. S separators are for tough and variable oils and do not have a constant water removal.

For fuel & lube oil applications the P separators are the better choice due to the higher removal capability of water and the lower investment cost. The S separators are only needed for high flows where no P separators are available.