Hydraulic
& Lubricating Oil Heaters
Warren Electric manufactures oil heaters for heating hydraulic and lube oil. These screw plug and flanged
immersion heaters are designed for heating most oils including locations where
circulation is reduced or non-existent.
High element surface temperatures can damage some oils or impair
their ability to perform as designed. These oil heaters are specifically
designed with low watt densities for direct immersion.
The HL Series
Warren Electric also manufactures a complete line of oil heaters designed
specifically for hydraulic oil. The "HL" oil heaters are ideal
for heating oils used in fluid power and machine lubrication applications.
The "HL" Series are designed with low watt densities (approx.
10 WSI) to allow direct immersion into the storage vessel without
degrading the oil or "coking" the heating elements. They
are used to maintain a desired temperature within hydraulic or lubrication
oil reservoirs.
Properly sized, when used in conjunction with the proper thermostatic
controls, Warren Electric "HL" Series Oil Heaters will maintain
the desired temperature of most oils. Specify weather or explosion
resistant terminal enclosure if required.
Typical applications include fluid power, compressors, hydraulics,
turbines, and bearings.
Wattage: |
0.5 to 100 KW |
Voltage: |
up to 600 volts (Single or 3 phase) |
Std. Flange Size |
4 1/2" Diameter |
Std. Screw Plug Sizes: |
2", 2 1/2", 3 NPT |
Screw Plug Material: |
Steel |
Flange Material: |
Cast Iron |
Pressure rating: |
up to 300 PSI |
Immersed Length: |
up to 80 inches |
Sheath Materials: |
Stainless steel, carbon steel and other alloys elements available |
Call us today. Tel: 905.940.0961 or by Email: info@valutechinc.com |