circulation electric heaters

products - | heat exchangers | steam traps | check valves | combustion equipment | separation | - - - | research | sitemap |

-

warren electric - flanged | circulation | screw plug | hydraulics | fuel | heat transfer | removable | custom |

-

home

history

a

products

services

applications

a

Alfa Laval

SGL Acotec

Gestra

AIC

CheckAll

Callidus

Robertshaw
Doyle & Roth
Warren Electric
Tulsa Heaters

a

technical papers

a

contact us

circulation electric heatersCirculation Electric Heaters

Warren Electric Corporation Circulation Heaters are designed and manufactured in a wide range of models, ratings, and watt densities for many applications. Either a flanged or screw plug heater is mated to a casing with inlet, outlet, vent, & drain options to meet your specifications.

The packaged system is designed to supply the right amount of energy to heat the process fluid to the desired temperature, for a given flow rate. Brazed or welded construction, center core baffles for increased velocities available.

Standard Features

  • Standard Pressure Vessels are Carbon Steel. Vessels are also available in most types of Stainless Steel. ASME Code Certification and National Board of Boiler & Pressure Vessels registrations are available on request.
  • Standard circulation heaters are furnished with high temperature insulation and steel jackets. Models can be furnished without insulation and jackets for lower-temperature applications. (A cost savings to you.)
  • Universal or custom mounting brackets are available.
  • Standard pressure vessels are up to 24” pipe and are Carbon Steel.
  • Screw Type Heaters, with Hex plugs in Carbon Steel, Brass Bronze and most types of Stainless Steel, are available in sizes up to 3 inches.
  • Inlets, outlets, drains, or extra openings can be your choice of female coupling (standard), threaded male pipe stub, or flanged.
  • Overall and immersed lengths, and inlet and outlet dimensions, can be varied to suit your application.

Heater Specifications

Wattage:

0.5 to 800 KW

Voltage:

110 to 600 volts, (50 or 60 Hz)

Flange size:

up to 24 Inch ANSI

Screw Plug size:

2" NPT, 2-1/2" NPT, 3" NPT

Pressure rating:

150 to 1200 PSI

Vessel Size :

Up to 24" Pipe

Flange Material:

Carbon Steel, Various Stainless Steels, Incoloy

Screw Plug Material:

Steel, Various Stainless Steels

Vessel Material:

Carbon Steel, Various Stainless Steels, Incoloy

Overall length:

Up to 160 inches

Sheath Materials:

Refer to Heater Element Sheath Material Options

Call us today. Tel: 905.940.0961 or by Email: info@valutechinc.com

 

Copyright ® 2008 | Valutech Inc. | All Rights Reserved

Valutech Inc.
70 Esna Park Drive, Unit 3
Markham, Ontario, Canada
L3R 6E7

Tel: 905.940.0961
Fax: 905.940.0983
Email: i
nfo@valutechinc.com