products - heat exchangers | steam traps | check valves | combustion equipment | separation | pool heaters
suppliers - alfa Laval | sgl group | gestra | checkall | callidus | robertshaw | doyle & roth | warren electric | tulsa heaters
gestra - steam traps | boiler blowdown valves | control valves | boiler monitoring equipment

Condensate Sytems and Tanks

Condensate systems use tanks to collect the condensate coming from steam users or flash vessels. From the tank the condensate is pumped into the feedwater tank by a level-controlled pump, in most cases via a deaerator. We offer several condensate systems of design type: SDR A and SDR 1. The SDR A system comes with a high-pressure centrifugal pump(s) installed next to the tank, while the SDR 1 system comes with a submersible condensate pump(s) bolted on top.

Download the Condensate Recovery and Return Systems Brochure.

The standard range of rectangular condensate tanks is designed for condensate flowrates of up to 10 t/h and a maximum service pressure of 0.1 bar g. The tanks are made of steel type S235JRG2 (RSt 37-2), inside: untreated, outside: anti-corrosion coating with two* condensate pumps and accessories installed next to the tank, e. g. bimetal dial thermometer, water-level indicator, GESTRA level electrode and control for automatic pump operation, non-return valves, shut-off valves, high-pressure centrifugal pump(s) and pressure gauge.
*Except size 1 (only available with one pump)

Call us today. Tel: 905.940.0961 or by Email: info@valutechinc.com