 Float
and Thermostatic Steam Traps- UNA
The UNA Series is a float and thermostatic steam trap with
a membrane regulator. It features pressure ratings up to PN 40 and
a very sensitive response characteristic.
Pressure ratings up to PN 160. For Condensate discharge without
banking-up even with load and pressure fluctuations.
Download UNA Spec Sheets
UNA 30 | UNA
40 | UNA 50
| UNA 60
Ball float traps are also suitable for the discharge of cold condensates,
distillates and condensate derived from chemical products. They
operate without any banking-up even with considerable load and pressure
fluctuations and at any back pressure. Compared with other trap
types, they are the least affected by dirt. The traps are supplied
with "Duplex" control (thermostatic bellows for automatic air-venting)
alternatively with "Simplex" control (without bellows) and hand
vent valve. The control unit is easily accessible after removing
the trap cover, and can be changed as a complete unit without removing
the trap from the line. The rolling ball valve produces very little
friction and can be operated with a minimum of force. This results
in small, light traps but with large capacities.
 Applications
For an industrial plant to achieve optimal efficiency for a long
period of time, choosing the right steam trap technology is of vital
importance. To capture steam from the heating process and discharging
it once it has lost all of its heat energy, a range of steam traps
are needed to suit all the possible varieties of applications and
requirements. Our steam traps have many practical applications and
are employed where:
- steam is generated, distributed or used
- fluids flow
- energy saving is possible
- environmental protection and safety-oriented control systems
are needed.
|
